|
http://www.obd2allinone.com/sc/detai...fi&track=mefbn
Better customer service & better product all the way around. |
Originally Posted by jryan26
(Post 2201532)
I have it on 2 recently purchased motors. But they have az speed/marine programmable computers. They came with a key with the original program on it.
|
Originally Posted by JasonSmith
(Post 2205462)
Send me all that stuff so I can get it fixed for you, FOOL!
Hey :chimp: Dont the motors have to be in the boat? |
You moron, I'm gonna plug them in on the bench.
|
Originally Posted by turnerrd
(Post 2201814)
Before you guys get into it. Talk to Scarab98 (Tom). He got it this year and had a horrible experience with it. Cost him his entire motor. Basiscally in a nut shell the program would whack out once in a while for no apparent reason and change all the settings. The last time it did it it went way too rich which in turn diluted the oil to the point that it spun the main bearings. Bad enough to where it couldn't be lined bored so he's waiting on a new block and crank. By the time he figured out what was going on it was too late, the damage was done. The only thing that could have let him know what was going on was his O2 sensor but that wasn't working. I'll let him know about this thread and he can elaborate
The sad part is he can't even get Jim to return his phone calls to talk about it and it has been over a week. ive heard the same,not good |
I bought the software and 4b. I sent them my mefi3 so they can copy it's config to the 4b so I would have a good running config to start with. I couldnt get the 4b to work (motor wouldnt start). Put the 3 back on and it runs as before.
Hell of a time getting ahold of Jim as he seems to be the only one there worth talking to. Not a good experience yet and still trying to get assistance. |
| All times are GMT -5. The time now is 04:05 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.