Still getting water in 1,3,5,7 (port cyls)!!
05-23-2006, 10:05 AM
#21
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
Re: Still getting water in 1,3,5,7 (port cyls)!!
Does revolution offer spacers to increase your riser height (if you have room) this might be a good idea.
05-24-2006, 12:59 PM
#22
Registered
Thread Starter
Join Date: Oct 2005
Location: Ankeny IA
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Re: Still getting water in 1,3,5,7 (port cyls)!!
Pulled the trigger on some Dart Iron Eagle Platinum angle plug, 200cc runners, 72cc chambers from jrmotorsports (local for me, still about the cheapest around, and good service, see www.jrmotorsports.com, they have big block stuff too.)
The bottom end was fine. Will put new bearings and rings in and deglaze the jugs
The bottom end was fine. Will put new bearings and rings in and deglaze the jugs
Thread
Thread Starter
Forum
Replies
Last Post
phughes69
General Boating Discussion
10
08-27-2008 07:15 PM
