Where could I find an assembled Alpha lower that has been coned? ALso wondering if you could get water pick-ups on the bottom of the bullet vs the sides of the drive? Looking for a friend of mine. You don't even want to know what this is going on

Look for an Alpha SS lower or get a hydromotive cone and do it yourself. Not very hard to do.

Cig 3 is right... The cone add on is the cheapest way. You can even epoxy it on if you want to.. Just use good epoxy... Like west, interlux or Mas..

Jamie / Lakeside

Thanks guys, That is what I would do but he wants a bolt on lower. I will just tell him self installation is the only option. Thanks