mercruiser water pressure relief valve question
#31
Registered
VIP Member
These are the best in my opinion.
Even though i haven't used other brands, Ive used these for quite a few years, and they have never failed and always hold exact pressure no matter what the conditions. And i have put them thru the test with lots of nasty water along the inland gulf coast rivers/sandbars with mud, sand, lily pads, and wood chips from rotten stumps.
They are not cheap though, esp for a plastic tee, a $2 spring, and a small rubber diaphram. Should be $50 in parts, but they are $400.
Worth every penny. Not long ago at all they were $200 or even less.
Even though i haven't used other brands, Ive used these for quite a few years, and they have never failed and always hold exact pressure no matter what the conditions. And i have put them thru the test with lots of nasty water along the inland gulf coast rivers/sandbars with mud, sand, lily pads, and wood chips from rotten stumps.
They are not cheap though, esp for a plastic tee, a $2 spring, and a small rubber diaphram. Should be $50 in parts, but they are $400.
Worth every penny. Not long ago at all they were $200 or even less.
Last edited by Cap'm Kurt; 06-15-2020 at 09:42 AM.
#33
Registered
VIP Member
Good to know Griff
Have you had luck with any particular brand or model? If you cant send that on here, then PM me please.
I have other friends that would like some, but the Mercs are too expensive.
Have you had luck with any particular brand or model? If you cant send that on here, then PM me please.
I have other friends that would like some, but the Mercs are too expensive.