454 ignition module
#4
Registered

Assuming you use a module with an appropriate advance curve for your engine, a Thunderbolt IV ignition module will work with the Thunderbolt V dist.
You will need the correct wire harness (not the main harness just the small dist to coil sub-harness). In addition to the loss of the rev limiter, you will also lose the knock monitoring, Mean Best Timing, and idle speed control of the T-bolt V.
Dave
You will need the correct wire harness (not the main harness just the small dist to coil sub-harness). In addition to the loss of the rev limiter, you will also lose the knock monitoring, Mean Best Timing, and idle speed control of the T-bolt V.
Dave