water pickups
#1
Registered
Thread Starter
Join Date: Feb 2004
Location: babylon
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
water pickups
i have a 38' scarab, i was wondering if my pickups are slowing me down. they are located 4' forward of the stern. they are wedge shaped, and are 1 7/8 thick at the back. if i changed to a diferent thrue hull pickup, can i leave them were they are now ??
#2
Gold Member
Gold Member
Thru-Hull Water Pick-Ups
What drives do you have & do your drives have existing water pickups in the sides? TRS drives, or?
Last edited by Ed; 03-11-2007 at 05:11 PM.
#4
Registered
Thread Starter
Join Date: Feb 2004
Location: babylon
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
the thru hull is my only water.never had one blade of grass with these wedges, but there shaped like my trim tabs in a down position. dont know if it matters 4' forfard.
#8
Registered
Thread Starter
Join Date: Feb 2004
Location: babylon
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
if i changed my thru hull pickups to the off shore thru hull pickups, they are to far forward and might not grab water without the wedges. it would be to easy to just change pick ups. has anyone tried it ??
#10
Registered
Be sure to check the pipe in those pickups, I just replaced mine due to the pipe being stainless and the pu being alu. The will rot out and you will never know untill you start to overheat in strange ways.