Zero effort controls
#1
Registered
Thread Starter
Join Date: May 2004
Location: Antioch, Il
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Zero effort controls
I have a poontoon boat (sold the Scarab & looking) and I want to put zero effort controls on it. What do I need? How much will it cost? I have a evenrude 115 etec motor on the poontoon boat.
Thanks
Bryan
Thanks
Bryan
#3
Registered
Thread Starter
Join Date: May 2004
Location: Antioch, Il
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered
Join Date: Jan 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Old thread but only one I found on somewhat my subject... does anyone have an idea where I can buy those hook clips to attach the kiekhaeffer throttle to the cable..?? Someone please know .. thank you!
#5
Offshoreonly Advertiser
Offshoreonly Advertiser
Genuine Mercury & Mercruiser parts. Zero Effect Control - Mechanical, Components
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#6
Registered
How many do you need? I CNC'd a few years ago. Might have 2 laying around still, red anodiized. $40
Also, I have used 10/32" female heim joints. Just knock the pin out, and clearance out the back of the lever so it fits.
https://www.ebay.com/itm/ECON-3-16-x-10-32-FEMALE-RH-ROD-ENDS-HEIM-JOINTS-HEIMS/390467150103?hash=item5ae9a7e117:g:fhgAAOSw1XdUU5t h&vxp=mtr
https://www.speedwaymotors.com/Stand...male,7723.html
Also, I have used 10/32" female heim joints. Just knock the pin out, and clearance out the back of the lever so it fits.
https://www.ebay.com/itm/ECON-3-16-x-10-32-FEMALE-RH-ROD-ENDS-HEIM-JOINTS-HEIMS/390467150103?hash=item5ae9a7e117:g:fhgAAOSw1XdUU5t h&vxp=mtr
https://www.speedwaymotors.com/Stand...male,7723.html
#7
Registered
Join Date: Jan 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=Rookie;4607734]How many do you need? I CNC'd a few years ago. Might have 2 laying around still, red anodiized. $40
Also, I have used 10/32" female heim joints. Just knock the pin out, and clearance out the back of the lever so it fits.
Thank you!! If you have 2 laying around I’ll buy em.. or if the ones in the link will work I’ll buy those.. I have the throttles completely disassembled
Also, I have used 10/32" female heim joints. Just knock the pin out, and clearance out the back of the lever so it fits.
Thank you!! If you have 2 laying around I’ll buy em.. or if the ones in the link will work I’ll buy those.. I have the throttles completely disassembled
#10
Registered
Thread
Thread Starter
Forum
Replies
Last Post
onesickpantera
General Boating Discussion
4
08-21-2007 08:20 PM