Offshoreonly.com - For all of you engine guru's

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - For all of you engine guru's (https://www.offshoreonly.com/forums/general-q/176988-all-you-engine-gurus.html)

PatriYacht

01-09-2008 06:12 AM

Quote:

Originally Posted by LakeRacer (Post 2399108)

My engine builder said with a flat top piston and a slightly bigger bore I should be at the same compression ratio or slightly higher than stock.

Do the math and figure in the deck hgt. the head gasket thickness and the chamber volume. It's the only way you'll know. If you aren't zero decking the block it may be lower than you think.

Pnb	01-17-2024 07:47 PM

Im looking at buying Lakeracers old boat. But it looks like he hasnt logged on since 2018. Does anyone have anymore information on the engine work he had done. Will it run on 87?

All times are GMT -5. The time now is 12:14 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page