Thankyou RM Builder
04-15-2008, 10:48 PM
#1
Chris
Gold MemberThread Starter
Thankyou RM Builder
I would like to thank Bob Madera aka RM Builder for specing the parts for my 540. I am really pleased. Dyno pull is with all accessories installed and blowing through Dana Marine Torque-flow exhaust.
Chris
Chris
04-15-2008, 11:11 PM
#2
VIP Member
I like the HP #'s from 4800 to 5900. that should pull some good #'s.Congrats , Bob is pretty sharp on designing a cam. He goes that extra info, unlike most cam manufactures,they usually don't ask much
Rob
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Charter Member
04-16-2008, 10:10 AM
#6
Originally Posted by Griff
The numbers look really good. I would think, prop it for 5400-5500rpms at wot as the spinning it 400 rpms faster for 10 hp isn't worth it.
but what does the 400rpm do for speed,mine was gaing 10 hp per 100rpm from 5800-6100,I prop it to 6000 for top speed, the capibilty doesent mean you run it there .
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
04-16-2008, 10:19 AM
#7
Platinum Member
Originally Posted by CB-BLR
I would like to thank Bob Madera aka RM Builder for specing the parts for my 540. I am really pleased. Dyno pull is with all accessories installed and blowing through Dana Marine Torque-flow exhaust. Chris
04-16-2008, 11:08 AM
#10
Chris
Gold MemberThread Starter
Kamma,
AFR 305 CNC, Dana Torque-Flow exhaust - wet, vortex collector sized for 540, with sea pump, alternator, power steering pump, water pump. 9.6 compression, victor manifold, HVH 1 inch super sucker, 1050 Dominator, Jessel rockers, Morel lifters, Bob's cam.
Looking forward to putting it in the boat next week.
Chris
AFR 305 CNC, Dana Torque-Flow exhaust - wet, vortex collector sized for 540, with sea pump, alternator, power steering pump, water pump. 9.6 compression, victor manifold, HVH 1 inch super sucker, 1050 Dominator, Jessel rockers, Morel lifters, Bob's cam.
Looking forward to putting it in the boat next week.
Chris
Last edited by CB-BLR; 04-16-2008 at 11:10 AM. Reason: corrections
