Is there an easy way to seperate eng from trans
#1
Registered
Thread Starter
Join Date: Nov 2000
Location: LOTO
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Is there an easy way to seperate eng from trans
Best way to pull eng from a boat with speedmasters it has a motor mount plate inbetween the eng and bellhousing that has the twin oil coolers in it are there bolts inside the oil coolers. Plenty of room to work around the trans in the boat can I leave it in the boat or is it faster to pull it all.
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
There are bolts inside the coolers, probably better to pull the whole thing
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Thread
Thread Starter
Forum
Replies
Last Post
handfulz28
Trucks, Trailers and Transportation
2
03-11-2008 04:39 PM
Wally
General Q & A
6
06-27-2006 08:22 AM