Alpha Trim Hose Replacement

Reply Subscribe

Thread Tools

04-25-2002, 10:15 PM

klmken

Registered

Thread Starter

Join Date: Jun 2001

Location: Alexandria, VA

Posts: 616

Likes: 0

Received 0 Likes on 0 Posts

Alpha Trim Hose Replacement

How does one go about replacing one of the hoses that runs from the trim pump to the transom assembly? I can undo the leaky hose at the trim pump but have no idea where it attaches in the transom assembly?? Merc manual doesn't say!!
Thanks,
Ken

04-25-2002, 10:41 PM

Tinkerer

Registered

Join Date: Jan 2002

Location: ALTO, MI

Posts: 4,612

Likes: 6

Received 7 Likes on 6 Posts

EASY -- Just remove the bolts holding the plate that the hoses conect to under the drive - next to the transom

04-26-2002, 06:45 PM

FloridianSon

Registered

Join Date: Aug 2001

Location: Gainesville Fl.

Posts: 573

Likes: 0

Received 0 Likes on 0 Posts

Don't use any thing but line wrenches on the hoses!

04-26-2002, 08:14 PM

doug hess

Guest

Posts: n/a

Before you try standing on your head in the bildge use the easy way outside where the trim cylinder hoses attach to the manifold block. Remove the two 1/4-20 NC bolts. Pull down the block. The hoses from the pump attach to the inside of that block.

Doug

Last edited by doug hess; 04-27-2002 at 10:54 PM.