timing on a procharged engine
09-01-2010 | 08:39 AM
#4
Thread Starter
Registered
Joined: May 2007
Posts: 20
Likes: 0
8.4 :1 boost up to 10 max. target 8psi. 6200RPM
gen 6 block with JE pistons and AFR 325 CNC heads
cutler/Hirel manifold with 1000CFM throttle body, 96 lbs injectors
M3SC with a 12 rib ,this system was off a merc 525
I realize I'll need more advance at lower RPM's untill the boost
comes in. since it's a jet it will rev up from the hit.
gen 6 block with JE pistons and AFR 325 CNC heads
cutler/Hirel manifold with 1000CFM throttle body, 96 lbs injectors
M3SC with a 12 rib ,this system was off a merc 525
I realize I'll need more advance at lower RPM's untill the boost
comes in. since it's a jet it will rev up from the hit.
Last edited by outlaw; 09-01-2010 at 08:58 AM.
