Question about ignition module
10-05-2010 | 04:59 PM
#11
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
I bought the CRC dielectric Greece and coated the plug and 2 post, after about 40hours its green,wouldnt even fire up.pulled it and cleaned it fired up then.
some more info http://www.megamanual.com/ms2/GM_7pinHEI.htm
some more info http://www.megamanual.com/ms2/GM_7pinHEI.htm
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
10-05-2010 | 05:34 PM
#12
Registered
Joined: May 2007
Posts: 518
Likes: 3
From: On a Boat
10-06-2010 | 06:47 AM
#13
Registered
Joined: Nov 2005
Posts: 4,554
Likes: 3
From: Fredericksburg, Va
the GM est dist like the module somebody posted have a special "marine" module with a specific timing curve and some(like mine) are designed to run without a computer, a std one will not advance, tried it a few years ago..
10-06-2010 | 04:33 PM
#14
VIP Member
Joined: Nov 2009
Posts: 1,520
Likes: 1
From: Ohio
i have a complete used Gen VI EST Distributor listed in the swap meet i was chasing a problem with my boat and replaced the distributor to find out my fuel pressure regulator was bad
__________________
www.bajaboatowners.com
www.bajaboatowners.com
10-10-2010 | 09:56 PM
#15
Thread Starter
Registered
Joined: Apr 2004
Posts: 18
Likes: 1
From: Pickerington,Ohio
Thx So Much guys for the replys,,,,, I haven't had a chance to pull the Ing. Mod. yet and am hoping to get to that this week sometime. I will check it out and try to respond to the replys.
