![]() |
fram fuel filter for 525
looking around for the fuel filter for my 525 I have been amazed of the cost & no cross reference for it . I found the fram g3727 is the exact replacement size wise . its a 10 micron filter . Anyone know if the mercuriser is a 10, 50 or 100 micron filter ?
I think the filter is one in the same, the fram filter had a recall & so did the mercruiser . price on the fram is 10$ cheapest i have found the mercruiser is 35 all the way up to 65 |
Fixx
Originally Posted by drgnrydr
(Post 3255436)
looking around for the fuel filter for my 525 I have been amazed of the cost & no cross reference for it . I found the fram g3727 is the exact replacement size wise . its a 10 micron filter . Anyone know if the mercuriser is a 10, 50 or 100 micron filter ?
I think the filter is one in the same, the fram filter had a recall & so did the mercruiser . price on the fram is 10$ cheapest i have found the mercruiser is 35 all the way up to 65 |
I wouldn't even use Fram for my winter storage filter.
Go with the Wix. You can get them at Napa, and if you buy a handful they will knock the price down a few bucks. |
ac delco gf652f about 12 bucks at any ac delco or gm store
|
thanks for the quick responces >
I perfer wix filters also but they did not list a cross reference of the merc pn .. kinda suprised that the wix is a just 4 mircron . the fram has more than twice the filtration |
I buy by the case and split with a buddy. You can get the prices down to about $6-7. Check EBay.
|
Originally Posted by drgnrydr
(Post 3255697)
thanks for the quick responces >
I perfer wix filters also but they did not list a cross reference of the merc pn .. kinda suprised that the wix is a just 4 mircron . the fram has more than twice the filtration |
But the Wix is the only one with the anti-drainback valve IIRC; preventing dry start up.
|
Originally Posted by 28cigarettess
(Post 3255722)
I think that you may have that backwards. I believe they mean it will filter down to 4 microns which is smaller than 10 microns.
Not trying to be a smart ass but you should not comment on what you dont know . It can be very misleading .. Read up on micron sizing ! you are 100% wrong .. :lolhit: |
Fixx
Originally Posted by drgnrydr
(Post 3256165)
Not trying to be a smart ass but you should not comment on what you dont know . It can be very misleading ..
Read up on micron sizing ! you are 100% wrong .. :lolhit: read and look at the chart..:) http://www.tpub.com/content/fc/14104/css/14104_153.htm |
| All times are GMT -5. The time now is 09:09 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.