Go Back  Offshoreonly.com > Technical > General Q & A
Mirage plus 25P >

Mirage plus 25P

Like Tree0Likes

Mirage plus 25P

Reply

Old 06-12-2011, 10:10 PM
  #1
Registered
Thread Starter
 
Join Date: Aug 2009
Posts: 51
Default Mirage plus 25P

Bravo X drive

removed my Bravo 1 prop to try 3-blade.. splines stick out pass hub on Mirage plus.. What's happening????
Brushwolf243 is offline  
Reply With Quote
Old 06-14-2011, 08:43 PM
  #2
Registered
iTrader: (1)
 
Join Date: Mar 2008
Location: pa
My Boat: 2011 sunsation 32s "Oarganiz'd Chaos"
Posts: 482
Default

make sure the spacer is not stuck to the back of the bravo prop and your trying to put the mirage on with no spacer, other than that not sure
blownhammer2000 is offline  
Reply With Quote
Old 06-14-2011, 09:59 PM
  #3
Registered
Thread Starter
 
Join Date: Aug 2009
Posts: 51
Default

after 3 calls to Mercury, figured out they sent the wrong spline/nut collar with prop
Brushwolf243 is offline  
Reply With Quote
Old 06-15-2011, 12:25 AM
  #4
Registered
 
Join Date: Mar 2009
Location: OFallon,Mo.
My Boat: 83' Nordic 23' Viking 505 BBC TRS Drive
Posts: 1,719
Default

What did you need , the concave washer one with the splines in it. What is that Mirage a solid hub?
picklenjim is offline  
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


OSO Sponsor
OSO Advertiser
OSO Advertiser
OSO Advertiser