CMI torque specs
06-10-2002 | 06:40 PM
#2
Gold Member
Joined: Jan 2001
Posts: 2,123
Likes: 1
From: Brooklyn Park, Md USA
Torque specs for CMI's.
Scott,
Torque the header bolts any where from 30 to 32 ft pounds and start with the center 2 and work your way out . Once you do the very last header, go back and do them again. A bolt actually stretches to stay tight. So it will loosen just alittle the longer they sit. You may even want to go back and do them again after you run the boat a few times.
Pwrbt33
Torque the header bolts any where from 30 to 32 ft pounds and start with the center 2 and work your way out . Once you do the very last header, go back and do them again. A bolt actually stretches to stay tight. So it will loosen just alittle the longer they sit. You may even want to go back and do them again after you run the boat a few times.
Pwrbt33
06-10-2002 | 08:06 PM
#3
Charter Member #355
Joined: Oct 2000
Posts: 434
Likes: 0
From: North Texas!
I have my elbow-tops torqued to 30 ftlbs. And rechecked after 10 hours. All is fine with no leaks.
Pwrbt33, thanks again for hooking me up with a drive!
Eric
Pwrbt33, thanks again for hooking me up with a drive!
Eric
__________________
Boatless in Texas......for now
Boatless in Texas......for now
