Engine Oil Questions. What do you think i the best!
#15
Thread Starter
Registered
Joined: Jun 2013
Posts: 84
Likes: 0
From: Minnesota
Thanks for all the info guys!! I am going to run the Mobile 1 15w50. My buddy is the manager for advanced audio store he said it is on sale right now and I get 2 free oil filters. Not bad I think 10 quarts is 62 bucks..
I really think it comes down to personal preference. I would minus a few oil they are mostly the same. We change our oil every fall in min so some years it could be 50 hours of use others it could be 200.
Thanks again everyone!! Now it is time to get dirty!!
Have a fantastic weekend!!
Chris
I really think it comes down to personal preference. I would minus a few oil they are mostly the same. We change our oil every fall in min so some years it could be 50 hours of use others it could be 200.
Thanks again everyone!! Now it is time to get dirty!!
Have a fantastic weekend!!
Chris
#16
RECOMMENDATION:
AMSOIL recommends motor oils containing high levels of
zinc/phosphorus for superior protection. The following tables
list many of the AMSOIL synthetic motor oils that are
formulated with high levels of anti-wear additives:Z-ROD™ 20W-50 Synthetic
Motor Oil (ZRF
Phosphorus
Level (ppm) 1320
Zinc Level (ppm 1440
Vs
Mobil One Mobil 1™ 15W-50 Phosphorus1200 Zinc 1300
Boosted, higher viscosity,
advanced full synthetic formula
designed for performance
vehicles.
HT/HS applications.
Racing and Flat tappet
applications. SN A3/B3
The cost of oil is always less expensive than broken engine parts. Just my .02 cents
AMSOIL recommends motor oils containing high levels of
zinc/phosphorus for superior protection. The following tables
list many of the AMSOIL synthetic motor oils that are
formulated with high levels of anti-wear additives:Z-ROD™ 20W-50 Synthetic
Motor Oil (ZRF
Phosphorus
Level (ppm) 1320
Zinc Level (ppm 1440
Vs
Mobil One Mobil 1™ 15W-50 Phosphorus1200 Zinc 1300
Boosted, higher viscosity,
advanced full synthetic formula
designed for performance
vehicles.
HT/HS applications.
Racing and Flat tappet
applications. SN A3/B3
The cost of oil is always less expensive than broken engine parts. Just my .02 cents
Last edited by 35fountain; 07-21-2013 at 06:56 AM.
#17
Registered
Joined: Feb 2008
Posts: 715
Likes: 0
From: Michigan
RECOMMENDATION:
AMSOIL recommends motor oils containing high levels of
zinc/phosphorus for superior protection. The following tables
list many of the AMSOIL synthetic motor oils that are
formulated with high levels of anti-wear additives:Z-ROD™ 20W-50 Synthetic
Motor Oil (ZRF
Phosphorus
Level (ppm) 1320
Zinc Level (ppm 1440
Vs
Mobil One Mobil 1™ 15W-50 Phosphorus1200 Zinc 1300
Boosted, higher viscosity,
advanced full synthetic formula
designed for performance
vehicles.
HT/HS applications.
Racing and Flat tappet
applications. SN A3/B3
The cost of oil is always less expensive than broken engine parts. Just my .02 cents
AMSOIL recommends motor oils containing high levels of
zinc/phosphorus for superior protection. The following tables
list many of the AMSOIL synthetic motor oils that are
formulated with high levels of anti-wear additives:Z-ROD™ 20W-50 Synthetic
Motor Oil (ZRF
Phosphorus
Level (ppm) 1320
Zinc Level (ppm 1440
Vs
Mobil One Mobil 1™ 15W-50 Phosphorus1200 Zinc 1300
Boosted, higher viscosity,
advanced full synthetic formula
designed for performance
vehicles.
HT/HS applications.
Racing and Flat tappet
applications. SN A3/B3
The cost of oil is always less expensive than broken engine parts. Just my .02 cents
#19
Jay;
I would continue using the 20W50 Z-Rod oil (or ARO) instead of the Dominator Racing oil in the boat.
Byron Selbrede
Technical Services
Last edited by 35fountain; 07-22-2013 at 01:39 PM.




