Stupid cam shaft idea? Serious question
08-01-2014, 11:56 PM
#1
Stupid cam shaft idea? Serious question
What would be the expected results of taling
a basic 454/330 8.5:1 flat top pistons (stock) motor with improved breathing - intake manifold, heads (781's with 2.25/1.88 valves), good exhaust stock cam, running well
installing a good used set of 1.8 roller rockers, again changing nothing else.
Really interested to hear, anybody else here try this?
a basic 454/330 8.5:1 flat top pistons (stock) motor with improved breathing - intake manifold, heads (781's with 2.25/1.88 valves), good exhaust stock cam, running well
installing a good used set of 1.8 roller rockers, again changing nothing else.
Really interested to hear, anybody else here try this?
08-02-2014, 12:00 AM
#2
Registered
iTrader: (1)
Stock sucks.
Gold Member
08-02-2014, 07:21 AM
#9
Seriously, there are a lot of decent running reliable older 454/330 out there, everybody says to change the cam, i was wondering if this may be a cheap easy way of trying to improve on what everybody knows is a major restriction to these.
Not everybody knows how or wants to or can even pull motor and change cam. Anybody can change rockers.
Not everybody knows how or wants to or can even pull motor and change cam. Anybody can change rockers.
08-02-2014, 07:33 AM
#10
Registered
What would be the expected results of taling
a basic 454/330 8.5:1 flat top pistons (stock) motor with improved breathing - intake manifold, heads (781's with 2.25/1.88 valves), good exhaust stock cam, running well
installing a good used set of 1.8 roller rockers, again changing nothing else.
Really interested to hear, anybody else here try this?
a basic 454/330 8.5:1 flat top pistons (stock) motor with improved breathing - intake manifold, heads (781's with 2.25/1.88 valves), good exhaust stock cam, running well
installing a good used set of 1.8 roller rockers, again changing nothing else.
Really interested to hear, anybody else here try this?
