hylift johnson lifters.
07-22-2019 | 12:14 PM
#65
Registered
Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
07-22-2019 | 01:53 PM
#66
Registered
Joined: Nov 2004
Posts: 14,108
Likes: 3,694
From: On A Dirt Floor
Thought this was gone over last week ?
I know it has been beat to death but ... hydraulic roller lifters ??
And yeh, MT has the link for the lifters above too.
I know it has been beat to death but ... hydraulic roller lifters ??
And yeh, MT has the link for the lifters above too.
07-22-2019 | 03:21 PM
#67
Registered
Joined: May 2013
Posts: 1,754
Likes: 6
From: Long Island, NY
Not enough time to go through this entire thread, but for what it's worth, I bought three sets of Hylift Johnson lifters for my three 525EFI's a few years ago. I experienced collapsed lifters on two out of three engines and ripped them all out. Got replacement lifters from Eddie Young (which are GM, I believe) and haven't had a problem since.
07-22-2019 | 11:15 PM
#68
Registered
Joined: Dec 2017
Posts: 33
Likes: 2
From: Somewhere between Santa Barbara and San Luis
Lifters
That's the way I'm going to go! Screw morel and their $800.00 junk(I'm still mad I have to spend more money on lifters) didn't I just pay $700 something for those? + Gaskets, oil probably pushrods, and oh yeah, got to buy more dogbones and spider, cuz I got rid of that stuff when I thought I bought the "good" stuff. At least the zz572 lifters are only $500, and I only need 1 set.........
07-23-2019 | 06:36 AM
#69
Platinum Member
Joined: May 2012
Posts: 11,434
Likes: 3,961
From: Midwest & T-Rock
Thought this was gone over last week ?
I know it has been beat to death but ... hydraulic roller lifters ??
And yeh, MT has the link for the lifters above too.
I know it has been beat to death but ... hydraulic roller lifters ??
And yeh, MT has the link for the lifters above too.
lift ones..............thanks MT, these are the taller bodied ones ?
