Rpm issue ideas.... I'm lost....

Reply Subscribe

Thread Tools

08-11-2016 | 08:35 AM

#121

Registered

Joined: Nov 2004

Posts: 14,097

Likes: 3,686

From: On A Dirt Floor

Quote:

Originally Posted by Full Force

that's what I figured, but I am checking and logging everything I can think of, I am going crazy over this, wish it would just be 100% been through enough....

Aren't you concerned about too much voltage to your batteries ? I forget if you checked voltage at batteries while running. If not, I would.

08-11-2016 | 08:37 AM

#122

Full Force

Thread Starter

Gold Member

Joined: Oct 2005

Posts: 11,691

Likes: 217

From: Olmsted Falls,Ohio Marblehead,Oh

Yes I am looking into cause now.

Quote:

Originally Posted by SB

Aren't you concerned about too much voltage to your batteries ? I forget if you checked voltage at batteries while running. If not, I would.

08-11-2016 | 08:38 AM

#123

Full Force

Thread Starter

Gold Member

Joined: Oct 2005

Posts: 11,691

Likes: 217

From: Olmsted Falls,Ohio Marblehead,Oh

It's ALWAYS the port engine!!!!

Quote:

Originally Posted by frickstyle

After you fix yours, can you fix mine? I'm down about 5600rpm on my port engine, can't figure it out either

08-11-2016 | 08:44 AM

#124

J-Bonz

Registered

Joined: Dec 2003

Posts: 5,975

Likes: 495

From: Cleveland, OH / Pewaukee, WI

Quote:

Originally Posted by frickstyle

After you fix yours, can you fix mine? I'm down about 5600rpm on my port engine, can't figure it out either

Where's the dislike button

08-11-2016 | 11:28 AM

#125

vintage chromoly

Gold Member

Joined: Sep 2011

Posts: 2,643

Likes: 18

From: cleveland ohio

Quote:

Originally Posted by frickstyle

After you fix yours, can you fix mine? I'm down about 5600rpm on my port engine, can't figure it out either

Unbelievable!
That sucks frick. How many hours this time?
You gonna give the guy on brookpark road another shot at it or are you finally done?

08-11-2016 | 11:51 PM

#126

ICDEDPPL

Registered

Joined: Jun 2009

Posts: 9,973

Likes: 6,467

From: Chicago

Tim, maybe you just need better glasses.

08-12-2016 | 04:42 AM

#127

Full Force

Thread Starter

Gold Member

Joined: Oct 2005

Posts: 11,691

Likes: 217

From: Olmsted Falls,Ohio Marblehead,Oh

Nah, just needs boost haha

Quote:

Originally Posted by ICDEDPPL

Tim, maybe you just need better glasses.

08-12-2016 | 07:58 AM

#128

Eliminated572

Registered

Joined: Aug 2011

Posts: 526

Likes: 1

From: US of A

Tim, you still didn't fix the rpm issue I assume? I was chasing this problem forever. And yes, port engine.

08-12-2016 | 08:01 AM

#129

Full Force

Thread Starter

Gold Member

Joined: Oct 2005

Posts: 11,691

Likes: 217

From: Olmsted Falls,Ohio Marblehead,Oh

Quote:

Originally Posted by Eliminated572

Tim, you still didn't fix the rpm issue I assume? I was chasing this problem forever. And yes, port engine.

Not sure didn't get boat in till tonight, I will report back

08-12-2016 | 08:05 AM

#130

Registered

Joined: Nov 2004

Posts: 14,097

Likes: 3,686

From: On A Dirt Floor

Sand the bottom of the port side of the boat more aggressively.

Sorry for stupid comments...no way I can help from here I don't think.

Reply Share

First
Prev
13 / 20
Next
Last