Offshoreonly.com - Cam and valvetrain longevity....??? low duration high lift...

Page 119 of 193

« First

109

119

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Cam and valvetrain longevity....??? low duration high lift... (https://www.offshoreonly.com/forums/general-q/341258-cam-valvetrain-longevity-low-duration-high-lift.html)

Full Force

10-04-2016 08:57 PM

as much as I try to keep up, I do have a family and a life at home, or work... I post when I can...

Quote:

Originally Posted by 33outlawsst (Post 4488330)

That was not directed at you, I got my answer

MILD THUNDER

10-04-2016 08:57 PM

If i were Tim, I would be sending the cam out for a hardness check .

F-2 Speedy

10-04-2016 09:01 PM

Quote:

Originally Posted by Full Force (Post 4488333)

as much as I try to keep up, I do have a family and a life at home, or work... I post when I can...

Its all good , its been a while back

phragle

10-04-2016 09:01 PM

Quote:

Originally Posted by MILD THUNDER (Post 4488334)

If i were Tim, I would be sending the cam out for a hardness check .

If I were Tim, I would be throwing the cams in the trash and moving on. Unless someone wants to check the hardness for free, there is no sense in throwing good money after bad...

Full Force

10-04-2016 09:05 PM

I was offered to do so, you know that, so if its at no or minimal cost for "education" then sure... will do.

Quote:

Originally Posted by MILD THUNDER (Post 4488334)

If i were Tim, I would be sending the cam out for a hardness check .

getrdunn

10-04-2016 09:07 PM

Quote:

Originally Posted by MILD THUNDER (Post 4488278)

680 lift crane hyd roller. 150/500 lbs

I see this cam popping up from you, myself and others as of recent. Wonder how it would work with 10.5:1 565 NA builds. Any thoughts. I'd I like to try a couple out when I go down state for a week. The Lunati EFI cam that got brought up the other day is another one. Lunati has couple that stand out actually.

MILD THUNDER

10-04-2016 09:10 PM

Quote:

Originally Posted by phragle (Post 4488337)

If I were Tim, I would be throwing the cams in the trash and moving on. Unless someone wants to check the hardness for free, there is no sense in throwing good money after bad...

It be nice to find out if in fact the cam was ground too far, or whatever. If in fact it was something he did wrong, he can learn from it, and not do it again.