|
Most Eliminators have them.Hard to find another manufacturer that has more crazy power installed in their boats.
|
Originally Posted by SB
(Post 4664235)
Most Eliminators have them.Hard to find another manufacturer that has more crazy power installed in their boats.
|
Originally Posted by Smoke eater
(Post 4664193)
Are you guys thinking this is to much cam? (288/294, Lift .585/.610, 112 L/S cam.) your cam is just fine. |
Originally Posted by ICDEDPPL
(Post 4664269)
I quoted and was refering to Fingscreenname.
(288/294, Lift .585/.610, 112 L/S cam. |
Originally Posted by GPM
(Post 4664241)
I'm not picking on anyone, anything, just thinking if the riser was long enough to dump at the 90, reversion would be a non issue. I could be wrong.
You can see the angle better in this picture, https://cimg8.ibsrv.net/gimg/www.off...30abdf1aad.jpg |
Originally Posted by f_inscreenname
(Post 4664381)
Being I have had the set up for 4 or 5 years now I can tell you there is no reversion issues. It has Merc 496 Aluminum manifolds and their SS risers. They are the tall of long version but that only means a 1/2" taller then the shorter ones. From there it all stays 4" and goes to the outlets in more of a pulled out "Z" pattern. In other words it don't double back on its self. All of it leans to the transom. It does have flappers on the tips. Nothing special but it works.
You can see the angle better in this picture, https://cimg8.ibsrv.net/gimg/www.off...30abdf1aad.jpg |
| All times are GMT -5. The time now is 05:38 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.