Merc 525 EFI Whipple build
03-31-2019 | 03:54 PM
#1
Thread Starter
Registered
Joined: Oct 2018
Posts: 15
Likes: 0
From: Norway
Merc 525 EFI Whipple build
Upgrading my 525 EFI with a Whipple KIT i noticed a spot of rust on the camshaft. So I want to change it.... problem is buying a new one, it’s absolutly a jungle. Anyone have any recomondations as to wich cam to buy, and what else that would be wise to change now that I am at it?
04-04-2019 | 09:47 AM
#5
Platinum Member
Joined: May 2012
Posts: 11,428
Likes: 3,955
From: Midwest & T-Rock
You have zero hours on a 2003 525 ?? you can use the Felpro PermaTorque MLS gasket a little cheaper than cometic
Last edited by F-2 Speedy; 04-04-2019 at 09:52 AM.
04-04-2019 | 10:36 AM
#8
Thread Starter
Registered
Joined: Oct 2018
Posts: 15
Likes: 0
From: Norway
The valvetrain has been loosened when stored. Pulling heads tomorrow, so will Get a clear vision on the cam. Will probobly run into other minor or major things that requiers your experience, so thankfullfor all inputs and help👍
