MSD distributor failure
06-23-2019 | 05:50 AM
#4
Thread Starter
Registered
Joined: Oct 2018
Posts: 32
Likes: 0
Mad mechanical distributor
what broke? They won’t run my engine now!
I’m not sure how to diagnose it. Ran fine a little while with one new msd 83606 distributor then just quit. Absolutely would not fire I even fried a starter trying to get it to run again.
i replace with another fired right up ran 5 minutes then quit!
I’m building 2 motors so I have 2 of everything.
i believe it’s possible for an ignition to spark but not be strong enough to run an engine I’ve seen that before.
how do I test things?
This is a plug & play distributor no ignition box needed.
How do I test a coil? What are the odds of both of my new coils failing? I say slim!
how do I test the ignition modular inside the distributor? And what are the odds of two of these failing?
Your help is greatly appreciated
cliff in maine
I’m not sure how to diagnose it. Ran fine a little while with one new msd 83606 distributor then just quit. Absolutely would not fire I even fried a starter trying to get it to run again.
i replace with another fired right up ran 5 minutes then quit!
I’m building 2 motors so I have 2 of everything.
i believe it’s possible for an ignition to spark but not be strong enough to run an engine I’ve seen that before.
how do I test things?
This is a plug & play distributor no ignition box needed.
How do I test a coil? What are the odds of both of my new coils failing? I say slim!
how do I test the ignition modular inside the distributor? And what are the odds of two of these failing?
Your help is greatly appreciated
cliff in maine
06-24-2019 | 07:36 AM
#8
Were doomed!
Joined: Oct 2000
Posts: 7,095
Likes: 1,389
From: Chicago, IL
