|
Cam choice
thinking abt a cam change what is in there now is comp cam extreme marine 284 hr... spec 230/236. 547/547 lift ..... motor spec. Are stroked 454 to a 496...9.5 to 1 comp ..heads are alum 330 runners. With 2.250/1.99 valves What would y’all recommend |
Oh, you opened the can now,
|
Originally Posted by GPM
(Post 4713755)
Oh, you opened the can now,
|
3/4 race cam for sure.:D
|
Ways to start Drama on offshore only..... Cams, Oil, Apache, Tow Vehicle rating. It is only November......lol
|
278/288
228/238 at .050 .612/.618 lift 114 lobe separation With a set of tie bar comp lifters....if only you could find one.... I know exactly where one is right now lol |
Originally Posted by BBYSTWY
(Post 4713764)
278/288
228/238 at .050 .612/.618 lift 114 lobe separation With a set of tie bar comp lifters....if only you could find one.... I know exactly where one is right now lol |
Originally Posted by cigrocket
(Post 4713761)
Ways to start Drama on offshore only..... Cams, Oil, Apache, Tow Vehicle rating. It is only November......lol
|
Comp custom grind...ran it in my motor for 8-9 hours...nothing wrong with it at all just going a little bigger
Its a flat/button nose cam If you're interested PM me...was gonna throw it on here once I get it pulled which should be this coming Saturday. |
What are your plans for the boat, how are you going to run it, towing skiers, cruising or a lot of wot ? what exhaust , what intake, carb or efi ?
|
| All times are GMT -5. The time now is 08:07 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.