I'm sure you're still traumatized over it... Have you sought counseling over it yet. If not, reach out and I'll be there for you. You got my number...

I modified this one but I still find the engines are crooked going on .. the trans in the back is heavy .
But I will steal all your ideas and make one for myself .. I find myself bored with no engines projects, I almost wanted to build an extra long block.lol

Lol, I know how you feel. I went to the shop yesterday and had nothing to do. I walked around lost for a bit. Then I started thinking about the oil filter location. I had them on the blocks using a sandwich style thermostat. Simple and clean setup, but was a bitc# to get to the starboard filter. Had to remove the tails and 1 header. Not that bad to do once a year, just wanted to see if I could figure something else out.

I`m in the boat a couple times a week looking for dumb $hit to change haha .
My filters are in the back but easy to get to

I got a new project for ya , now that you got holley ECU`s , them screens and Holley gauges are pretty cool. I got rid of probably 20lbs of hoses and sender wiring . One data wire does it all now .



Common, let me spend your money!!

this is how I did mine,ex-nascar filter heads on modify merc alternator brackets w/ lift brackets incorporated.

I've been eyeing the Digital dash panels, but they are pricey. I'd probably run my 10" tablets with Holley's dash setup first to see how I like it and glare. I run my navigation and stereo from a mounted 12" Samsung Tablet in front of the passenger on the dash. I'm working on setting up a wireless hub to the ECU. It's a little tough with out the 5v out from the ECU.

Nice, I'm also looking at the Teague transom mount filter brackets currently.

here you go

https://www.ebay.com/itm/DC-DC-7-26V...-/203100160829

I think I'm going to first try a Raspberry Pi. I have a couple laying around and I am somewhat familiar with them when I was building a digital gauge cluster before I bought the Holley ECU's.