2 stroke compression question
#31
Registered
Thread Starter
Yes, you are right.. Nobody makes ultralight 2 stroke outboards anymore. It's a shame. For what you describe, I would look into a powerhead or block.
Complete powerhead -
https://www.ebay.com/itm/Yamaha-Outb...-/254663384100
Above motor may have salt rot in it. I suppose you could ask the guy to pull off the exhaust chest cover and send pictures...
Or, here is a very pretty bare block. You might want pictures of the cylinders..
https://www.ebay.com/itm/15HP-63V-15...-/273383360024
Complete powerhead -
https://www.ebay.com/itm/Yamaha-Outb...-/254663384100
Above motor may have salt rot in it. I suppose you could ask the guy to pull off the exhaust chest cover and send pictures...
Or, here is a very pretty bare block. You might want pictures of the cylinders..
https://www.ebay.com/itm/15HP-63V-15...-/273383360024
I found a new Yamaha case for just over 1000. I seen the China version. Much cheaper but I worry about the quality. The machining tolerances and also the metal quality.
Thanks
#32
Registered
Thread Starter
#33
#34
Registered
Thread Starter