BBC 427 roller cam
12-16-2020 | 03:59 PM
#11
Registered
Joined: Mar 2004
Posts: 2,697
Likes: 93
From: Pa
its a 2 bolt block, I plan on running the stamped steel roller tip rockers to fit under the OE valve covers, Its an all stock rotating assembly with new K Black forged pistons, the heads are stock oval port closed chamber heads..............Im not trying to build a TF engine......
12-16-2020 | 04:08 PM
#12
Thread Starter
Platinum Member
Joined: May 2012
Posts: 11,440
Likes: 3,972
From: Midwest & T-Rock
The new guides have been machined for a roller higher lift cam, Id like to spin it to 5800 to 6k if I want
12-16-2020 | 04:09 PM
#13
Registered
Joined: Apr 2004
Posts: 1,268
Likes: 239
From: Michigan
12-16-2020 | 05:29 PM
#14
Registered
Joined: Oct 2007
Posts: 8,439
Likes: 94
From: yorkville,il
i think the hp500 efi cam would be a good choice,230/236 at .050.598/610 lift 114 lsa.crane cams 169621.with the factory heads and 10.25 to 1 cr i think it will make you smile.i might have one on the shelf,if interested il check.
12-16-2020 | 05:43 PM
#15
Thread Starter
Platinum Member
Joined: May 2012
Posts: 11,440
Likes: 3,972
From: Midwest & T-Rock
12-16-2020 | 08:25 PM
#19
Thread Starter
Platinum Member
Joined: May 2012
Posts: 11,440
Likes: 3,972
From: Midwest & T-Rock
