MPI oil filter head. Restriction?
#11
Platinum Member
Platinum Member
Thread Starter
iTrader: (2)
There’s nothing stock in mine with exception of the modified filter head. If I could figure a way of putting. a different tube and fitting in the center, I would. However, I’m thinking it may not be necessary especially when considering the flow direction (smaller into larger).
#12
Registered
iTrader: (7)
I just meant generally speaking. Btw I just went up and looked at my remote housings and believe them to be stock for 525’s etc etc. They are 06883’s??? Just questioning if they would be an issue or not. Will be turning 6,300. Don’t mean to hijack your thread btw.
The following users liked this post:
getrdunn (03-09-2021)
#14
Platinum Member
Platinum Member
Thread Starter
iTrader: (2)
I wonder is this would work in the MPI oil filter head?
https://www.mercruiserparts.com/bam/...1345/10127/190
Ref # 4 - 22-806328 - Fitting
https://www.mercruiserparts.com/bam/...1345/10127/190
Ref # 4 - 22-806328 - Fitting
#19
Registered
iTrader: (7)
I thought the oil stat coolers were 1/2 but there 3/4. I may have just answered my own question unless I hear otherwise. Running 12 AN hose throughout. Not that I need it however just figure any extra oil I can have the better but it’s for 565’s pretty much maxed out for NA anyway.
#20
Registered
Obviously all 3 of us are overthinking this, I see the extra strength Excendrin in your picture....
The following 3 users liked this post by 87MirageIntruder: