588 Blower Motors Cam Choice

Reply Subscribe

Thread Tools

10-19-2021 | 06:08 PM

#11

getrdunn

Registered

Joined: Feb 2009

Posts: 8,356

Likes: 1,515

From: NW Michigan

I have 4.25 stroke 565 CI cams spec’d 249/253 6k peak. Heads 347 cc out flowing 340 cnc promaxx heads via Jim v. just a comp

10-19-2021 | 06:24 PM

#12

GPM

Registered

Joined: Mar 2004

Posts: 2,696

Likes: 93

From: Pa

If it is a 4.5 stroke, it could use more cam

10-20-2021 | 01:56 AM

#13

Griff

Charter Member # 55

Joined: Oct 2000

Posts: 20,241

Likes: 2,490

From: Omaha/LOTO

588ci is a 4.5 stroke and 4.625 bore.

10-20-2021 | 07:44 AM

#14

boostbros

Registered

Joined: Nov 2003

Posts: 1,107

Likes: 685

i,m thinking time for a pair of 14-71s and bigger carbs

10-20-2021 | 08:14 AM

#15

kvogt

Registered

Joined: Aug 2003

Posts: 1,129

Likes: 32

From: Racine, Wisconsin

thats a 604ci

10-20-2021 | 08:15 AM

#16

kvogt

Registered

Joined: Aug 2003

Posts: 1,129

Likes: 32

From: Racine, Wisconsin

The OP does need a blower that moves more air more than a cam change.

10-20-2021 | 09:01 AM

#17

hogie roll

Registered

Joined: Jan 2006

Posts: 3,865

Likes: 793

From: St. Pete Beach, FL

Quote:

Originally Posted by Griff

588ci is a 4.5 stroke and 4.625 bore.

most likely a 4.5 bore x 4.625 stroke

10-20-2021 | 09:11 AM

#18

Bad to the bone

Thread Starter

Registered

Joined: Oct 2001

Posts: 396

Likes: 195

From: kansas city

sweet thanks for all the input trying to find out bore and stroke but no info yet. Yea love to stick some Whipples on it but sticking with old school blower for now and since engine apart was just thinking about cam upgrade. any other input would be appreciated. GetRDunn what is lift and separation

Tks