Tunell raaammm!!!!
10-24-2022, 03:27 PM
#251
These are also taller runners but not as tall as the tunnel ram and no fuel injection bungs.
https://www.alkydigger.net/product/RR9-8.html
I`ll probably invest a few more bucks into the tunnel rams, I really want port injection for individual fuel and timing control.
Found a guy to modify the tunnel rams....
https://www.alkydigger.net/product/RR9-8.html
I`ll probably invest a few more bucks into the tunnel rams, I really want port injection for individual fuel and timing control.
Found a guy to modify the tunnel rams....
2 New custom built blower manifolds for fuel injection with fuel rails mounted 3300.00 - 3500.00 each 5-6 weeks to build, I think those are cast intakes, I could cut the runners off and shorten them and reweld and machine and blend back around 1200.00 - 1500.00 each or cut runners off make new runners and fit and reweld and re blend and weld bungs and mount fuel rails 2000.00
The following users liked this post:
Unlimited jd (10-24-2022)
10-24-2022, 05:55 PM
#252
Registered
iTrader: (1)
Is the Victor #70855 shorter ? If so, how much ?
The following users liked this post:
SB (10-24-2022)
11-21-2022, 08:36 AM
#254
Registered
iTrader: (1)
See bottom of the new article. Not sure if would help your situation ?
https://www.speedonthewater.com/whip...-upgrade-kits/
https://www.speedonthewater.com/whip...-upgrade-kits/
The following users liked this post:
ICDEDPPL (11-21-2022)
