What do I need????
09-04-2022 | 08:49 AM
#11
Registered
Joined: Mar 2020
Posts: 372
Likes: 182
From: East Tennesseee
Yes correct - I can’t bend it no where near enough…. Like I’m only getting about an 1/8 throttle. That just dawned on me regarding the style of plate under carb type. I actually have some here but for 4150 platform. Just strange the engines that were in had 1050 Dom’s. Regardless what I’ll have to get Tks
09-04-2022 | 09:53 AM
#12
Platinum Member
Joined: Feb 2001
Posts: 4,295
Likes: 1,457
From: Virginia Beach
Tan with Blue stripe is alarm.
Brown with White stripe (may look black) should be oil temp (Merc harness - trim indicator wire).
Yellow and Red stripe is neutral safety (it breaks the connection to the solenoid).
My TRS boat is wired this way.
09-05-2022 | 09:22 AM
#13
Thread Starter
Registered
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
Notta… The accelerator pump arm was literally laying flush under the throttle cable bracket. Allowing no action whatsoever.
If I would’ve had a pic of underside it would’ve clearly showed.
If I would’ve had a pic of underside it would’ve clearly showed.
Last edited by getrdunn; 09-06-2022 at 11:00 AM.
09-06-2022 | 12:35 AM
#14
Platinum Member
Joined: Sep 2001
Posts: 5,769
Likes: 150
From: tn
I am having a hard time figuring out whats happening. A "throttle plate" is the round things with 2 screws on them that open and close the venturis - so I'm guessing that you are talking about the cable mount brackets?
09-06-2022 | 10:59 AM
#15
Thread Starter
Registered
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
