Offshoreonly.com - Oil temp/cooler setup questions

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Oil temp/cooler setup questions (https://www.offshoreonly.com/forums/general-q/377210-oil-temp-cooler-setup-questions.html)

I have to go to the side instead of straight down as usual for rear engine mount bolts, but everything clears

Quote:

Originally Posted by BBYSTWY (Post 4848349)

I'm thinking I am going to have to mount everything down on the stringers due to my exhaust....it's already super tight with the stock setup and I don't think there's any way that will fit. My exhaust goes in towards the center of the engine and exits right above the intermediate housing. Looks awesome and sounds awesome but kinda a pain in the arse hahaha.

I ended up installing my new coolers to the stringers below the engine mounts. They are from CP and have the power steering cooler included. 3"x23" supposed to be good from 450 to 750 hp. I'm at the low end of that but I figure better safe than sorry. https://cimg2.ibsrv.net/gimg/www.off...1af9cd90f6.jpg

Nice setup! Compact and out of the way..I'm going to need the bigger plate cooler for my application but I plan to mount them in a very similar fashion.