Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Americn Offshore 2600 ??? (https://www.offshoreonly.com/forums/general-q/75660-americn-offshore-2600-a.html)

MAX VELOCITY 04-01-2004 12:11 PM

Americn Offshore 2600 ???
 
I just purchased an American Offshore 2600. I will be putting a 572ci 750hp motor in it. What type of props is everyone running on the AO? Bravo, Hyrdomotive, etc?

Also, what type of speeds can I expect with 750 hp in this boat. I will be happy in the 90's, but some people are saying I could see more?

BadDog 04-01-2004 01:21 PM

Is this boat from the Louisville area of KY? La Grange?

Cord 04-01-2004 02:19 PM

The only prop that I've found so far to work real well is the Bravo 1. I havn't had a chance to try a Hydromotive yet. If planing is questionable with a bravo, then the hydro won't plane at all. If you are running a really high x-dim take a look at the new 5 blades coming out. I've heard some impressive results by reducing the slip numbers.

The top speed is all up to you and your ability to set the boat up. I have 580hp and mine runs 90mph. I'm also disappointed with that speed because I think it should run almost 100. I've actually had people accuse me of lying, just because they have 150 more hp and are running slower. :rolleyes:

cstraub69@comcast 04-01-2004 02:30 PM

Heck I thought racecars only lost 200HP from the dyno to the track. . .sorry for the hi-jack but had to comment.

Chris

MAX VELOCITY 04-01-2004 02:31 PM

No the boat is not from the Louisville area.

Thanks for the infor Cord. The people that are setting this up for me know what they are doing, so I should get top performance out of it. I have a lab finished bravo 1 30 pitch that I think I will try for starters. It should give me a good baseline to start from.

merlin540 04-01-2004 02:31 PM

4 BLADE HYDRO AND BOAT SHOULD RUN RIGHT AT 100 WITH 1.36 RATIO IT WILL TAKE 30 PITCH :D

Cord 04-01-2004 02:37 PM

If your drive is 1.5, then a 30 won't be enough. I'm running a 1.5 and a 32 for 90. Gotta get that slip down.

cat n around 04-01-2004 03:44 PM

I have a 2600 nsx it had a merlin 540 blown in it last summer with app 700hp I ran a 32labbed bravo I prop with a imco drive 1.34 gear ratio I turned that prop 6000 rpms and it was a great prop for it. I have built a 572ci blown dyno results were 800hp at 5200 rpms this winter and I have a 33 labbed hydromotive 5 blade we are going try I will let you know how that prop works out. Speed wise I think you will be very pleased cause that boat should be over a 100mph on gps with 750hp. With app 700hp my boat was 104mph on gps with a very bad slippage problom, slip was like 20%

MAX VELOCITY 04-01-2004 04:22 PM

Yes, the drive is 1.50. I didn't think the labbed 30 bravo would be enough, but it is worth trying to get a starting point. I too have heard good things about the 5 blades and would be interested in any results anyone has from them.

Banana Split 04-01-2004 05:29 PM

Shortie
 
Has any one ever tried a one inch or two inch shortie on a ao 2600?


All times are GMT -5. The time now is 12:39 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.