Cool Fuel Cover???
04-23-2004 | 04:20 PM
#3
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Way down under the exhaust manifold on the right side(facing motor). It snaps over your fuel pump on the side.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
04-23-2004 | 04:27 PM
#4
Thread Starter
FIERCE ALLEGIANCE
Joined: Jun 2003
Posts: 1,207
Likes: 0
From: West palm Beach, FL & SML VA
Originally posted by WHOSNEXT
Isn't that a fuel filter cover? if so over your fuel filter.
Isn't that a fuel filter cover? if so over your fuel filter.
No this one flat... The fuel filter cover is in place. I looked around but didn't see anything.
04-23-2004 | 04:28 PM
#5
Thread Starter
FIERCE ALLEGIANCE
Joined: Jun 2003
Posts: 1,207
Likes: 0
From: West palm Beach, FL & SML VA
Originally posted by US1 Fountain
Way down under the exhaust manifold on the right side(facing motor). It snaps over your fuel pump on the side.
Way down under the exhaust manifold on the right side(facing motor). It snaps over your fuel pump on the side.
04-25-2004 | 03:22 PM
#8
Charter Member #1171
Joined: Feb 2001
Posts: 4,018
Likes: 21
From: Clearwater, FL
Put it on a shelf,,, dont bother !! its a pain in the azz to put back on.
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.
04-25-2004 | 03:38 PM
#9
Thread Starter
FIERCE ALLEGIANCE
Joined: Jun 2003
Posts: 1,207
Likes: 0
From: West palm Beach, FL & SML VA
Got it on with a little help. Glad I looked though, cause my motor mount screw was half way off? Has that ever happened to anyone else? I cranked it back down tight. Should I be concerned?
04-25-2004 | 04:09 PM
#10
Registered
Joined: Jul 2002
Posts: 1,322
Likes: 1
From: Maximo FLA
Motor mount screw?
Do you mean the nut on top or below the big pin (bolt) so YES! dont just tighten the top nut down. Your motor is out of line.
If your talking about the bolts that go into the block, yes tighten them suckers up.
Rag's
Do you mean the nut on top or below the big pin (bolt) so YES! dont just tighten the top nut down. Your motor is out of line.
If your talking about the bolts that go into the block, yes tighten them suckers up.
Rag's
