where is OIL Bypass valve?
04-30-2004, 02:51 PM
#1
Registered
Thread Starter
where is OIL Bypass valve?
I'm confused, is the bp valve in the block on a '97 502 or is it in the bolt on oil filter/ cooler adapter? No more ? after this I promise.
04-30-2004, 06:11 PM
#2
VIP Member
VIP Member
It's in the block, in the filter
adapter pad area, just in front
( towards the front of the engine)
of the center opening ( where a
oil filter would thread on)
Hope this helps.
jt
adapter pad area, just in front
( towards the front of the engine)
of the center opening ( where a
oil filter would thread on)
Hope this helps.
jt
Charter Member
05-03-2004, 05:22 PM
#6
Registered
Join Date: Sep 2001
Location: Houston, TX, USA
Posts: 2,287
Likes: 0
Received 0 Likes
on
0 Posts
Bypass goes in round hole that is at 1 o'clock (has lip) on filter pad. As you can see, oil comes from oil pump to oblong hole, thru filter & then to engine. If filter is pluged then oil goes thru bypass on side & then to engine.
