After going crazy with this i found i was running an alfa ram and i bravo ram, bought a new ram and i hoped the problem was solved but not, im trying to find the cause of this and maybe i found it, on the selenoids there is a green and blue wire, when i jumped the selenoid that had the blue wire my drive went down and of course when i jumped the one with green it went up. I guess the lines are wrong and hope this could be the problem finally?

If the wires where just reversed, wouldn't the switch just work backwards and not explain why the drive works fine under 30 mph and not over 30? Sounds more like a hyd problem, either leaking ran or pump issues. Just thinking out loud here.

Is that true thought? someone here said that the circuits were different and up would be alot higher than down, i hope to solve this problem soon.

Blue is up for sky and Green is down for grass. Sounds like the lines are reversed and the switch is in mounted wrong. Swap lines and and flip the switch and I bet it works fine.

Does having the lines backwards would make any difference in the way the pump works trimming up? i get a mix of answers, one says makes no difference if the wires are crossed and some say it affect the trim up, hope someone that had this problem would post here.

Had same problem.Lines on pump were reversed

Thanks for the info guys, I hope to try the trim monday now that i reversed the lines, unless this fing hurricane doesnt destroy my boat, im right in the eye path of this storm, but hell i guess it could be worse.
Carlos