Flushing systems
05-31-2002 | 12:50 PM
#21
Registered
Joined: Apr 2001
Posts: 1,464
Likes: 0
From: Annapolis MD
Kelly,
I had an earlier model of the "same thing" in my old Donzi. They would ocasionally stick in the "flush" position as they can load up with "gunk" around the piston so the spring won't treutn it. Not a big problem to disassemble and clean them, but you do need to remember to check for water flow out the transom every time you start the boat.
-Greg
I had an earlier model of the "same thing" in my old Donzi. They would ocasionally stick in the "flush" position as they can load up with "gunk" around the piston so the spring won't treutn it. Not a big problem to disassemble and clean them, but you do need to remember to check for water flow out the transom every time you start the boat.
-Greg
