Re: Rebuilt engines in progress
 

Two rotors had to be replaced. These are the 1071's from the cat. They also polished them

Re: Rebuilt engines in progress
 

Stopped by Dave Wesseldyk's (WESCO) shop today. I think it's known that parts can always break in an engine without it always the engine builder's fault. I suppose there can be a lot of rumors out there as to what to use, and what not to use. However, the bad/costly thing about this is that if parts/components are STILL installed in an engine even if WARNING NOTICES are ignored or component reliability is not researched properly---well, it can lead to sour grapes in a heartbeat on what was expected to be a fun day.

Anyway, Dave is a seasoned marine engine builder, and I think his idea is that he wouldn't want what I mentioned above to happen to anyone---so, I though it would be appropriate to post it here, and on Linster's other thread concerning timing sets.

Dave showed me this WARNING NOTICE (post #41) from Callies concerning the use of Multi-Keyway timing gears as shown on one of the engines in Linster's "Gen VI Timing Set" thread.

Re: Rebuilt engines in progress
 

The correct drives for the blowers are arriving tomorrow. While we are waiting for a couple more parts, like the new valve covers because the old ones were not high enough for the new jesel rocker bolts, Dave will have spray can in hand and painting the black to a lovely blue to match the boat.

Dyno yet this week.

Ship next week of no problem.

TNT installs.

We are in water running before the New Year if TNT is not too busy.

Re: Rebuilt engines in progress
 

Yeah, it's too bad some people don't listen to Dave the first time he tells them they're being obtuse.

Re: Rebuilt engines in progress
 

This is the color that the engines will be.

Re: Rebuilt engines in progress
 

These are the engines ready to be sprayed. Already cleaned and primed.

Re: Rebuilt engines in progress
 

Hardware waiting to dress out the engines once SuperDave does the paint thing.

Re: Rebuilt engines in progress
 

Engine frame mounts all PC'd and ready to go.

Re: Rebuilt engines in progress
 

Painted. :D

Re: Rebuilt engines in progress
 

Educate me alittle here. What is the purpose of the screens on the blocks? Thanks.