speed estimate
#11
Registered User
Joined: Jan 2005
Posts: 239
Likes: 0
From: weatherford texas
Originally Posted by Steve Zuckerman
I used to own a '98 24' H2X. I was able to GPS 80 with 625HP blown BBC. The boat had rocketship acelleration with a 28" Bravo. I tried a 30", lost acelleration and top end was about the same.
Have a friend who ran a blown BBC (same HP) in a H2X. He also put a Stellings set back box on his with +2" X dimension. The box really helped. He eventually managed 89 GPS,
also with a 28" Bravo.
Not that familiar with your model boat. The H2X has a lot more lift built into the hull than other Baja models. It has flat chines, 3 strakes per side, a small pad, and a 21o deadrise.
The most fun was rocking the world of a lot of twin engine guys that jumped on my little 24 "stock"
Baja.
Regards,
Steve
Have a friend who ran a blown BBC (same HP) in a H2X. He also put a Stellings set back box on his with +2" X dimension. The box really helped. He eventually managed 89 GPS,
also with a 28" Bravo.
Not that familiar with your model boat. The H2X has a lot more lift built into the hull than other Baja models. It has flat chines, 3 strakes per side, a small pad, and a 21o deadrise.
The most fun was rocking the world of a lot of twin engine guys that jumped on my little 24 "stock"
Baja.Regards,
Steve
#12
Originally Posted by blownbaja24
I would like some educated guesses on my top end. I have 1989 baja 24 sport,496 blown approx 600hp. What prop should I start with. I hoping to see close 80 mph.
#14
My 24 Outlaw ran 75 on gps with 550 blown hp. I would start with a 28" Bravo 1. Baja has told me the "safe maximum" for that hull is 80 mph. If you modify the hook you may get more speed, but then you change the dynamics and it may cause a problem somewhere else.
If need to go over 80 I would also consider a different hull.
If need to go over 80 I would also consider a different hull.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com







