Mefi greif. Help? Who's got the best Source.
03-01-2005, 10:24 PM
#1
Registered
Thread Starter
Join Date: Apr 2004
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Mefi greif. Help? Who's got the best Source.
Well I sent my Mefi 3 to Mark for programming and guess what?
Dead as a doornail. Being a rookie I think, well how hard can it be to get a new ECM.
Its not that hard but it sure is expensive!
I have got a few leads but am looking for anyones help who has gone thru this before.
Who has the best source on these little puppies?
GM? Used? Boat wreckers?
Any thoughts?
Dead as a doornail. Being a rookie I think, well how hard can it be to get a new ECM.
Its not that hard but it sure is expensive!
I have got a few leads but am looking for anyones help who has gone thru this before.
Who has the best source on these little puppies?
GM? Used? Boat wreckers?
Any thoughts?
03-02-2005, 06:55 AM
#2
Gold Member
Gold Member
Join Date: Jun 2004
Location: Laguna Niguel, CA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mefi greif. Help? Who's got the best Source.
Innovation engines in Florida did mine sometime back. I have a MEFI 3 TECh MATE engine analysizer to sell if your interested. Send me a PM if interested.
03-02-2005, 08:46 AM
#3
Platinum Member
Platinum Member
Join Date: Oct 2002
Location: DFW, Texas
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mefi greif. Help? Who's got the best Source.
I have an ECM from mine that I'll be selling but honestly I'm not sure if it's MEFI3 or 4. It's from my 2000 7.4 MPI. It had been reprgormmed by Tyler Crockett a couple of years ago when I had some engine work done so it does not have stock 7.4 MPI programming.
If someone can confirm what I have
we'll see if it'll work for you.
Oh, and if you need some 42lb injectors (HP500 take outs, also from Tyler, I ran for about 60 hours) they are up for grabs as well.
If someone can confirm what I have
we'll see if it'll work for you.Oh, and if you need some 42lb injectors (HP500 take outs, also from Tyler, I ran for about 60 hours) they are up for grabs as well.
03-02-2005, 11:29 AM
#4
Racer
Re: Mefi greif. Help? Who's got the best Source.
Originally Posted by SeaRay Jim
I have an ECM from mine that I'll be selling but honestly I'm not sure if it's MEFI3 or 4. It's from my 2000 7.4 MPI. It had been reprgormmed by Tyler Crockett a couple of years ago when I had some engine work done so it does not have stock 7.4 MPI programming.
If someone can confirm what I have we'll see if it'll work for you.
Oh, and if you need some 42lb injectors (HP500 take outs, also from Tyler, I ran for about 60 hours) they are up for grabs as well.
If someone can confirm what I have
we'll see if it'll work for you.Oh, and if you need some 42lb injectors (HP500 take outs, also from Tyler, I ran for about 60 hours) they are up for grabs as well.
03-02-2005, 11:35 AM
#5
VIP Member
VIP Member
Re: Mefi greif. Help? Who's got the best Source.
I have an extra I'll sell for $350. It has an AZ Speed program that didn't work for my combo but the ECU is good...
__________________
Patrick
Patrick
03-02-2005, 02:31 PM
#7
Platinum Member
Platinum Member
Join Date: Oct 2002
Location: DFW, Texas
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mefi greif. Help? Who's got the best Source.
Originally Posted by TylerCrockett
Jim that was a Mefi 3 and I can reprogram what ever you need in it if somebody needs it. Tyler.
Originally Posted by bobl
I've got a couple of MEFI 3 available also. I think $350 is about the going price for them.
Unless of course you're pitching to sell mine too. LOL 
03-02-2005, 09:48 PM
#9
Registered
Thread Starter
Join Date: Apr 2004
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mefi greif. Help? Who's got the best Source.
Thanks guys, I think I have this under control.
I am just going by what Mark at Precision has told me.
Dead MEFI 3.
Sounds like from this board like he is the kind of guy you can really trust.
Thats what so good about the internet bad news spreads fast.
Have not seen or heard any bad news on Mark.
Totally takes the time to explain things and has been very, very helpful.
Most of you guys on this board are very helpful. Thanks.
Dave
I am just going by what Mark at Precision has told me.
Dead MEFI 3.
Sounds like from this board like he is the kind of guy you can really trust.
Thats what so good about the internet bad news spreads fast.
Have not seen or heard any bad news on Mark.
Totally takes the time to explain things and has been very, very helpful.
Most of you guys on this board are very helpful. Thanks.
Dave
