Real Quality of HTM SR 24's
11-13-2012 | 08:11 AM
#11
Registered
Joined: Dec 2011
Posts: 38
Likes: 0
From: Huntington Beach
[QUOTE=stirling;3813510]Jason ,can you give me the center propshaft height from your boat ?
Mine is exactly 1 inch under the lowest part of the sponsons with the drive level .
I ran the Bmax yesterday with 7 psi boost at 93 mph with a 26 pitch Bravo 1 prop ,and 1,30 ratio
Now the boat feels great ,thoug it need a lot positive trim to get the bow up ,once its up it feels very stable and true .
Thx A.J[/QUOTE
I've never measured my prop shaft height.
Call Greg at cutting Edge and give him your speed/rpm data and have him make you a similar prop as I'm running. Mine have much more lift than a Bravo, so my sweet spot on the trim guage is just above half.
Mine is exactly 1 inch under the lowest part of the sponsons with the drive level .
I ran the Bmax yesterday with 7 psi boost at 93 mph with a 26 pitch Bravo 1 prop ,and 1,30 ratio
Now the boat feels great ,thoug it need a lot positive trim to get the bow up ,once its up it feels very stable and true .
Thx A.J[/QUOTE
I've never measured my prop shaft height.
Call Greg at cutting Edge and give him your speed/rpm data and have him make you a similar prop as I'm running. Mine have much more lift than a Bravo, so my sweet spot on the trim guage is just above half.
