Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Hustler (https://www.offshoreonly.com/forums/hustler-38/)
-   -   Up Date Your 388 Hustler (https://www.offshoreonly.com/forums/hustler/92301-up-date-your-388-hustler.html)

Too Old 12-25-2005 10:03 AM

Re: Up Date Your 388 Hustler
 

Originally Posted by Strip Poker 388
Fred Can we get the Hustler script put on the center cap?


Rob

I think I can get someone to do that for us........

Strip Poker 388 12-27-2005 11:21 PM

Re: Up Date Your 388 Hustler
 
Do I have to change the hub like in the picks???

Too Old 12-28-2005 06:28 PM

Re: Up Date Your 388 Hustler
 

Originally Posted by Strip Poker 388
Do I have to change the hub like in the picks???


No...........

rush 06-27-2006 08:12 PM

Re: Up Date Your 388 Hustler
 
ttt

myvalium 08-21-2006 08:48 PM

Re: Up Date Your 388 Hustler
 
any tips on keeping the nav light open when underway?

Strip Poker 388 08-22-2006 08:18 AM

Re: Up Date Your 388 Hustler
 

Originally Posted by myvalium
any tips on keeping the nav light open when underway?

The front pop up nav light has a bendable tap that keeps it shut and open. You can look in the anchor locker underneath it and bend it a little to give it more tension.it will make it hard to open. Mine will stay open but bounces when hitting waves.

myvalium 08-22-2006 01:10 PM

Re: Up Date Your 388 Hustler
 
Thanks... sounds easy enough

Strip Poker 388 05-14-2008 12:03 AM

3 Attachment(s)
I got the foam from Hustler, I cut it with a turkey knife, Ordered the vinyl from Hustler also, had a local shop sow it up with a zipper in the bottom, I wanted the same density of the seat cushions so it would sleep the same, Made the board out of 3/4 plywood,finished it.If I did it again I would order the materials from McLeod,and or maybe even get them to make it up. The center cushion makes it a pretty big bed,the board rides up front under the front v birth chushion.

I also had Mcleod make me some embrodierd throw pilows.

Strip Poker 388 05-14-2008 12:14 AM

1 Attachment(s)
The inlet hose that goes between the transom and the water pump,the rear motor mount bolt head is close to the hose by the rear motor mount, It had rubbed a little hole in it and was spraying water every were.When i preplaced it,I cut a spare the same length if it did it again and also got this in line adapter if the hose got a hole,cut etc any other time so I wouldn't be down on a run,the clamps,hose, pipe union/barbed piece was cheap,something else to keep in the boat,ya never know:D

Strip Poker 388 05-14-2008 12:30 AM

3 Attachment(s)
I had cleaned the interior so much I had bleached out the embroidery(Hustler) on the head rest,ocd:(And the rear seat bottom had a seam coming unsoed .This past winter I sent it all back to McLeod to get redone, I wanted it to be just like factory ,since there the one that supplied it to Hustler, I didn't trust any locall guys to do it right ,Stefanie McLeod was very helpful and I thought reasonable.Took About 3 weeks.


All times are GMT -5. The time now is 03:23 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.