Notices

ran the mag

Thread Tools
 
Old 07-11-2007, 09:38 PM
  #31  
Gold Member
Gold Member
 
h2oboater's Avatar
 
Join Date: Dec 2003
Location: NewBaltimore Mi
Posts: 3,492
Received 54 Likes on 31 Posts
Default

Originally Posted by nocigarette
Hey mark, thanks for the offer but i have had all of the blocks and helm unit apart and replaced the o rings, i am complaining a lot so the wife just lets me buy full hydralic................
Mike I have been down that road, dont complain to much. Just want to make sure your Mag is safe If that dose not work let me know.
h2oboater is offline  
Old 07-12-2007, 09:29 AM
  #32  
Platinum Member
Platinum Member
 
Mag27's Avatar
 
Join Date: Oct 2002
Location: Fort Myers, Florida
Posts: 596
Likes: 0
Received 0 Likes on 0 Posts
Default

Mike,i had lot of problems with hynatic over the years from what your tauking about to losing it altogether after 40mpi.Had a 22ft streight inbrd. with the eng. infront of the driver and after about 40 you had no steering,after compaining to the co. they sent out a new pump but did not cure it.Finally sold the boat and let sombody else fight with it. When i put Vixen together i put in a new capalono helm and love it,no power just hydralic.The guys used to complain that after the races their arms were tired but i did all the testing and felt safe with it.
Mag27 is offline  
Old 07-12-2007, 05:58 PM
  #33  
Gold Member
Gold Member
Thread Starter
 
nocigarette's Avatar
 
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes on 32 Posts
Default

Originally Posted by Mag27
Mike,i had lot of problems with hynatic over the years from what your tauking about to losing it altogether after 40mpi.Had a 22ft streight inbrd. with the eng. infront of the driver and after about 40 you had no steering,after compaining to the co. they sent out a new pump but did not cure it.Finally sold the boat and let sombody else fight with it. When i put Vixen together i put in a new capalono helm and love it,no power just hydralic.The guys used to complain that after the races their arms were tired but i did all the testing and felt safe with it.
Thanks mel.........Hey mel what power valves are you running in your 540 and where is your main jets.....I imagine you have a dominator carb..........Just trying to get everybodys thoughts on tuning for a 540
nocigarette is offline  
Old 07-13-2007, 01:23 PM
  #34  
Platinum Member
Platinum Member
 
Mag27's Avatar
 
Join Date: Oct 2002
Location: Fort Myers, Florida
Posts: 596
Likes: 0
Received 0 Likes on 0 Posts
Default

Mike,yes we do run a dominator on the mech.540 and a 850 on the hydralic eng.Was always a believer in a little lean gave a little more power,but after running into some valve problems on 4 an 6 clyinders went back and set it up according to the merc book.cant say we lost much power but had no more trouble with 4 an 6 cylinders running lean.According to what i wrote down,the power valves were 6.5 and jetting was pri.98an sec.98.This may seem rich but it was a lot safer for the eng.Now that were running her as a pleasure boat i could probably lean it out a little bit but i know this works, so far,so why fool with it.Mick, i think this is somthing you have to play with on your own.Every time i got myself in trouble i went back to the merc book an seen how they did it and usually it came out ok.Sorry i couldnt help you more,but the 540 is a great way to make power but they can make you lose your religion real quick.
Mag27 is offline  
Old 07-14-2007, 08:19 AM
  #35  
Gold Member
Gold Member
Thread Starter
 
nocigarette's Avatar
 
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes on 32 Posts
Default

http://www.youtube.com/watch?v=HwnG3DJ3TJk


try this from yesterday hope it works
nocigarette is offline  
Old 07-14-2007, 08:23 AM
  #36  
Gold Member
Gold Member
Thread Starter
 
nocigarette's Avatar
 
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes on 32 Posts
Default

I can hear it miss a little, i was to lean in that video fixed now, was out last night and it is a ton better
Attached Thumbnails ran the mag-magnum-138.jpg   ran the mag-magnum-139.jpg  

Last edited by nocigarette; 07-14-2007 at 08:26 AM.
nocigarette is offline  
Old 07-14-2007, 04:16 PM
  #37  
Registered
 
24degrees's Avatar
 
Join Date: Jun 2005
Location: Minneapolis, MN
Posts: 1,373
Likes: 0
Received 3 Likes on 2 Posts
Default

You're a menace to society!!!!........I love it!!!!........
24degrees is offline  
Old 07-15-2007, 06:27 AM
  #38  
Gold Member
Gold Member
Thread Starter
 
nocigarette's Avatar
 
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes on 32 Posts
Default

rained yesterday hope to get out with the camera today......got rid of the miss seems to be ok....at least the people on the canal think so......They keep giving me the thumbs up or is that the middle finger
nocigarette is offline  
Old 07-15-2007, 06:40 AM
  #39  
Registered
iTrader: (1)
 
Join Date: Nov 2005
Location: south jersey
Posts: 1,838
Received 36 Likes on 16 Posts
Default

in my experience it's usaully the middle finger...looks good.
jdub is offline  
Old 07-15-2007, 07:41 AM
  #40  
Gold Member
Gold Member
Thread Starter
 
nocigarette's Avatar
 
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes on 32 Posts
Thumbs up

Yah i wasnt sure but i had a feeling thats what it was............
nocigarette is offline  


Quick Reply: ran the mag


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.