|
Thanks, that will probably be the approach I will use since there is no room on the back of my engine and the decking of a Rage for a rear engine mount. Where do your inlet and outlet oil lines to the cooler connect to the engine? Where did you get the oil cooler hold down clamps? Thanks in advance. Bill |
1 Attachment(s)
Heres my old Scarab,its a big industrial cooler from Teague,if I had to do it again, i would prob mount it to the motor or on the stringer below the motor, i like the idear on everything mounted to the motor, self contained, you can pull it off the dyno and put in boat and be running in a hour,keeps it simple.
Its brass in the pick:ernaehrung004: |
Rob,
I see you went to AFR heads in one photo. How much did they help over the GM heads you had? |
Originally Posted by Strip Poker 388
(Post 2730573)
Heres my old Scarab,its a big industrial cooler from Teague,if I had to do it again, i would prob mount it to the motor or on the stringer below the motor, i like the idear on everything mounted to the motor, self contained, you can pull it off the dyno and put in boat and be running in a hour,keeps it simple.
Its brass in the pick:ernaehrung004: |
Originally Posted by Rage
(Post 2730531)
Plane Silly,
Thanks, that will probably be the approach I will use since there is no room on the back of my engine and the decking of a Rage for a rear engine mount. Where do your inlet and outlet oil lines to the cooler connect to the engine? Where did you get the oil cooler hold down clamps? Thanks in advance. Bill |
Originally Posted by Linster
(Post 2730617)
Rob,
I see you went to AFR heads in one photo. How much did they help over the GM heads you had? Linnie that was a buds motor showing me how he did his bracket,Wish I had some alum heads, I really need blocks first:drink: |
Originally Posted by Strip Poker 388
(Post 2729918)
Thanks,Yea we talked Hustlers for about a hour Nice guy, he's going to have a hell of a ride when he gets it going!!!
Hollar anytime, I gave him my cell. Dave he must of snuck out and bought it without you'll knowing:evilbDon't give him to hard of a time:ernaehrung004: He didn't really sneak it on me; he actually flew me out to give it a once over :) (Thanks to Bill (Rage) for toting us around!) He stepped out of the Nordic box with his choice and I think he made a good one :ernaehrung004: Guess I'll be learning a bit more about these Slingshots; I actually have a 525EFI Whipple motor from another one on my operating table :D Talk to you soon, Dave |
Originally Posted by Strip Poker 388
(Post 2730678)
Linnie that was a buds motor showing me how he did his bracket,Wish I had some alum heads, I really need blocks first:drink:
Just a credit card away. I am ready to do something else. Kinda washed my hands of projects but getting a little bored now. I want to see what Dave does first. |
Originally Posted by Linster
(Post 2731174)
Just a credit card away. I am ready to do something else. Kinda washed my hands of projects but getting a little bored now. I want to see what Dave does first.
Linnie you thinking of going bigger?:ernaehrung004: |
Originally Posted by Plane Silly
(Post 2730654)
I also have a remote oil filter mounted to the transom and those are the lines that run to the oil cooler.
What oil line size did you run to and from the cooler? |
| All times are GMT -5. The time now is 04:10 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.