Offshoreonly.com - Oil Cooler Installation Ideas

Page 4 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Nordic (https://www.offshoreonly.com/forums/nordic-99/)

- - Oil Cooler Installation Ideas (https://www.offshoreonly.com/forums/nordic/198216-oil-cooler-installation-ideas.html)

Rage	11-22-2008 10:32 AM

Quote:

Originally Posted by Plane Silly (Post 2742906)

Sorry I can't help much with the mount. The Tbolt clamps are made to the floor mounts. I'm sure CPperformance or Eddie Marine carry something like them.

Thanks Plane Silly. Yes they do but it is the high end/dollar billet aluminum stuff. I am looking an alternative. Do you happen to know who installed your heat exchanger? I sent your picture to Dustin Whipple who said those were not his brackets.

Bill

27 MAGNUM

12-27-2008 08:48 PM

Is the water supposed to go to the sea pump first then to the oil cooler or can I run the water through the oil cooler on the way to the sea pump?

DareDevil

12-27-2008 09:59 PM

Quote:

Originally Posted by 27 MAGNUM (Post 2766153)

Is the water supposed to go to the sea pump first then to the oil cooler or can I run the water through the oil cooler on the way to the sea pump?

I would run it into the seastrainer ,then pump and then oilcooler .

39 Unlimited

12-28-2008 05:43 PM

Quote:

Originally Posted by Linster (Post 2736561)

Rob
I was hoping to find some Merc 575SC tops complete with blowers & throttle bodies. None seem to be moving around. May look for some whplles or go bigger

Merry Christmas big boy, see ya in Louisville: 575 X 2 = 98 - 100 MPH. Rock on Linster!

27 MAGNUM

12-28-2008 07:10 PM

Not running strainers

All times are GMT -5. The time now is 08:51 AM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page