I know they had a blower apart I could the blue goo squeezed out the front of the drive housing.

And I don't get scared.

Thank god you walked over to tell them what was wrong with it!

Just kidding sak . I did see it in the water though.

I just figued you can't tell port from starboard.

They did tell me I had a problem with the cap and rotor on that motor.

I think Mr_V was right about the shot gun approach. You're gonna get billed for 3 caps/rotors, 4 sets of plug wires, 3 map sensors, 3 IAC motors.... The dude probably had his push cart loaded up with parts before he went down to the boat! Brett called me, he said the dude was like screw the scan tool I'll just start swappin till I find it!

Just kiddin, glad everything is fixed! Let's go boating!

I told them to do all three motors again. I don't know what to trust and what not to. I never cut corners on the boat I'd rather throw out a good part for peace of mind than possibly put someone in danger because of losing an engine offshore when I need it.

Check on the condo last night. Its still there. I didn't have the energy to climb up and take the cover off that can wait till Saturday when its back in the water. Besides I was to busy makin sure Marty's beer was cold.

I was gonna ride down there on the jet ski last night but couldn't find a life jacket! Must be all in the boat. I won't be done til mon or tues.

Last weekend took the kid out for her first ride in a 41, what a disaster, she refuses to wear that Lil Mustang life jacket on the boat.
Going to give it another shot today this time on the Navesink, 18ft boat leaving from Barnacle Bills, it should be calm water in that area today. Hope it works out

Wait til you guys see what showed up at the marina! Looks pretty nice! Guess it's gonna be a o/l club