Class 3 for 2011
#81
I disagree, class 6 is the perfect entry level class, and there both working. And if they were combined, thatd be from 15-22 boatsin class 5. Im all for competition but at what point does it become a little extreme? If it aint broke dont fix it, class 5 and 6 are fantastic. Is anyone in either class not thrilled with there experience this year? And i dont mean personal differences off the course, I mean with the way the class was run.
#82
I disagree, class 6 is the perfect entry level class, and there both working. And if they were combined, thatd be from 15-22 boatsin class 5. Im all for competition but at what point does it become a little extreme? If it aint broke dont fix it, class 5 and 6 are fantastic. Is anyone in either class not thrilled with there experience this year? And i dont mean personal differences off the course, I mean with the way the class was run.
#83
I see what you mean, but to me class 6 is a lot easier for guys who have pleasure boats to get hooked with. For example, Akula or the Scarab. Even the guys with 21 SOBs occasionally run. Its not that they couldnt in class 5, it just seems class 6 its easier to take your boat and race it in.
#85
If they build an over kill boat, move them up or it just kills the class.
#87
#88
Registered
Joined: Sep 2004
Posts: 641
Likes: 0
From: utica,n.y.
#90
This contradicts your previous post regarding the 32 Skaters. If a boat runs above the class speed by 5 mph in PREFECT CONDITIONS it should be moved up. A 32 Skater with 750s runs above 105 as does a 38 Vee with 950s or a 29 with 800hp runs over 75mph.
If they build an over kill boat, move them up or it just kills the class.
If they build an over kill boat, move them up or it just kills the class.
My comment about the skater is more about safety than anything else. A classic 32 skater has to be run extremely hard to keep up with a 36 Skater, 37 talon etc. When we ran Stylin in Class 1 ( a full race 36 spectre) relentless (32 skater) was competitive until the real rough days, where it had to be run on the ragged edge. It was not with the 40 motion that ran.




