MIAMIBOYZ

The mig 28 is getting a bigger bang with the upgrade of the 5 inch tubes of Stainless Marine Gen 3`s. Frank (aka) thedonz my big brother and driver in the race course gave me the exhaust as a present. I will need to make the holes in the back bigger to fit the big tubes. The motor will have a bit more advantage at top end.

Stormrider

Wow, you were running gen2s the whole time w/ that kinda hp?
I went the stainless route instead of headers when i had the choice.
Why are you?

MIAMIBOYZ

Gen 3 make more power/torque than any other set-up. It has been proven to me on the Dyno at Chief engines many times. We even got them on the 38 Cig race boat, and the performance has been noticed.

Stormrider

Thats good to hear from someone else besided SM.
I'm sure you chuckle at all the header talk.

I'm surprised the gen2s held up so well w/ your HP.
I think that speaks volumes for the product.

lowblue320

Albert, some people are heading out on the 1 of january want to join us were thinking of going to gilberts or maybe shooters up north....

Andy,

MIAMIBOYZ

Andy let me know, I`m ready, I`ll talk to Frank so we can take the Pantera and the Cig. I have room for two people if we take both boats.

Albert

tomcei

Albert I can give you the address in Atlanta to the recyling center for the old exhaust

B-Stubb

Im excited to try my Gen 3 as well However I think the gen 2 were heads and tails above the CMIs

MIAMIBOYZ

Brian I had a set of CMI`s, however, when I was proven on the dyno that even my Gen 2`s made more hp I was convinced. I will remove my motor after tomorrow`s day on the water to dyno the motor with the Gen 3`s.

MIAMIBOYZ

Tom I`m keeping the Gen 2`s, they have been real good to me.