24 Foot TRS x dimension
11-26-2013 | 07:36 PM
#31
VIP Member
Joined: Oct 2002
Posts: 5,246
Likes: 3
From: Ivoryton, CT
My Dad's 1978 24' Excalibur had a 400/454 TRS with the prop shaft set about 7" below the bottom.
My 1989 24' Pantera 330/454 Bravo had the prop shaft about 5" below; same with my 1997 24' Superboat.
My 22' Donzi has the prop about 7" below but it's a round bottom at the transom not a straight V all the way back like the Pantera and Super.
Personally I believe having the prop 5" below is a good place and will work with both 3 and 4 blade props.
My 1989 24' Pantera 330/454 Bravo had the prop shaft about 5" below; same with my 1997 24' Superboat.
My 22' Donzi has the prop about 7" below but it's a round bottom at the transom not a straight V all the way back like the Pantera and Super.
Personally I believe having the prop 5" below is a good place and will work with both 3 and 4 blade props.
__________________
Patrick
Patrick
11-27-2013 | 09:56 PM
#32
Charter Member
Joined: Jan 2001
Posts: 1,237
Likes: 2
From: south east of dome island
Was thinking iron man. Idk it was b1.
Ya with my b1 [email protected] my exh is right up a against the rub rail
good luck!
Ya with my b1 [email protected] my exh is right up a against the rub rail
good luck!
